Who Is Sachin Tendulkar?

Sachin Ramesh Tendulkar (ⁱ/ˌsətʃɪn tɛnˈduːlkər/; born 24 April 1973) is a former Indian cricketer and captain, widely regarded to be the greatest cricketer of all time.^[4][5][6][7] He took up cricket at the age of eleven, made hisTest debut on 15 November 1989 against Pakistan in Karachi at the age of sixteen, and went on to representMumbai domestically and India internationally for close to twenty-four years. He is the only player to have scored one hundred international centuries, the first batsman to score a double century in a One Day International, holds the record for most number of runs in both ODI and Test cricket, the only player to complete more than 30,000 runs in international cricket.^[8]

In 2002 just half way through his career, Wisden Cricketers' Almanack ranked him the second greatest Test batsman of all time, behind Don Bradman, and the second greatest ODI batsman of all time, behind Viv Richards.^[9] Later in his career, Tendulkar was a part of the Indian team that won the 2011 World Cup, his first win in six World Cup appearances for India.^[10] He had previously been named "Player of the Tournament" at the2003 edition of the tournament, held in South Africa. In 2013, he was the only Indian cricketer included in an all-time Test World XI named to mark the 150th anniversary of Wisden Cricketers' Almanack.^[11][12][13]

Tendulkar received the Arjuna Award in 1994 for his outstanding sporting achievement, the Rajiv Gandhi Khel Ratna award in 1997, India's highest sporting honour, and the Padma Shri and Padma Vibhushan awards in 1999 and 2008, respectively, India's fourth and second highest civilian awards.^[14] After a few hours of his final match on 16 November 2013, the Prime Minister's Office announced the decision to award him the Bharat Ratna, India's highest civilian award.^[15][16] He is the youngest recipient to date and the first ever sportsperson to receive the award.^[17][18] He also won the 2010 Sir Garfield Sobers Trophy for cricketer of the year at the ICC awards.^[19] In 2012, Tendulkar was nominated to the Rajya Sabha, the upper house of the Parliament of India.^[20] He was also the first sportsperson and the first person without an aviation background to be awarded the honorary rank of group captain by the Indian Air Force.^[21] In 2012, he was named an Honorary Member of the Order of Australia.^[22][23]

In December 2012, Tendulkar announced his retirement from ODIs.^[24] He retired from Twenty20 cricket in October 2013^[25] and subsequently announced his retirement from all forms of cricket,^[26][27] retiring on 16 November 2013 after playing his 200th and final Test match, against the West Indies in Mumbai's Wankhede Stadium.^[28] Tendulkar played 664 international cricket matches in total, scoring 34,357 runs.^[8]

Match Results

Results

Main article: Result (cricket)

If the team that bats last is all out having scored fewer runs than their opponents, the team is said to have "lost by n runs" (where n is the difference between the number of runs scored by the teams). If the team that bats last scores enough runs to win, it is said to have "won by n wickets", where n is the number of wickets left to fall. For instance a team that passes its opponents' score having only lost six wickets would have won "by four wickets".

In a two-innings-a-side match, one team's combined first and second innings total may be less than the other side's first innings total. The team with the greater score is then said to have won by an innings and n runs, and does not need to bat again: n is the difference between the two teams' aggregate scores.

If the team batting last is all out, and both sides have scored the same number of runs, then the match is a tie; this result is quite rare in matches of two innings a side. In the traditional form of the game, if the time allotted for the match expires before either side can win, then the game is declared a draw.

If the match has only a single innings per side, then a maximum number of deliveries for each innings is often imposed. Such a match is called a "limited overs" or "one-day" match, and the side scoring more runs wins regardless of the number of wickets lost, so that a draw cannot occur. If this kind of match is temporarily interrupted by bad weather, then a complex mathematical formula, known as the Duckworth-Lewis method after its developers, is often used to recalculate a new target score. A one-day match can also be declared a "no-result" if fewer than a previously agreed number of overs have been bowled by either team, in circumstances that make normal resumption of play impossible; for example, wet weather.

Innings Closed

Innings closed

Main article: End of an innings (cricket)

An innings is closed when:

1. Ten of the eleven batsmen are out (have been dismissed); in this case, the team is said to be "all out"
2. The team has only one batsman left who can bat, one or more of the remaining players being unavailable owing to injury, illness or absence; again, the team is said to be "all out"
3. The team batting last reaches the score required to win the match
4. The predetermined number of overs has been bowled (in a one-day match only, commonly 50 overs; or 20 in Twenty20)
5. A captain declares his team's innings closed while at least two of his batsmen are not out (this does not apply in one-day limited over matches)

Dismissal (Out)

Dismissals

Main article: Dismissal (cricket)

There are eleven ways in which a batsman can be dismissed; five relatively common and six extremely rare. The common forms of dismissal are "bowled", "caught", "leg before wicket" (lbw), "run out", and "stumped". Less common methods are "hit wicket", "hit the ball twice", "obstructed the field", "handled the ball" and "timed out" – these are almost unknown in the professional game. The eleventh – retired out – is not treated as an on-field dismissal but rather a retrospective one for which no fielder is credited.

If the dismissal is obvious (for example when "bowled" and in most cases of "caught") the batsman will voluntarily leave the field without the umpire needing to dismiss them. Otherwise before the umpire will award a dismissal and declare the batsman to be out, a member of the fielding side (generally the bowler) must "appeal". This is invariably done by asking (or shouting) "how's that?" – normally reduced to howzat? If the umpire agrees with the appeal, he will raise a forefinger and say "Out!". Otherwise he will shake his head and say "Not out". Appeals are particularly loud when the circumstances of the claimed dismissal are unclear, as is always the case with lbw and often with run outs and stumpings.

1. Bowled: the bowler has hit the wicket with the delivery and the wicket has "broken" with at least one bail being dislodged (note that if the ball hits the wicket without dislodging a bail it is not out).^[35]
2. Caught: the batsman has hit the ball with his bat, or with his hand which was holding the bat, and the ball has been caught before it has touched the ground by a member of the fielding side.^[36]
3. Leg before wicket (lbw): the ball has hit the batsman's body (including his clothing, pads etc. but not the bat, or a hand holding the bat) when it would have gone on to hit the stumps. This rule exists mainly to prevent the batsman from guarding his wicket with his legs instead of the bat. To be given out lbw, the ball must not bounce outside leg stump or strike the batsmen outside the line of leg-stump. It may bounce outside off-stump. The batsman may only be dismissed lbw by a ball striking him outside the line of off-stump if he has not made a genuine attempt to play the ball with his bat.^[37]
4. Run out: a member of the fielding side has broken or "put down" the wicket with the ball while the nearest batsman was out of his ground; this usually occurs by means of an accurate throw to the wicket while the batsmen are attempting a run, although a batsman can be given out Run out even when he is not attempting a run; he merely needs to be out of his ground.^[38]
5. Stumped is similar except that it is done by the wicketkeeper after the batsman has missed the bowled ball and has stepped out of his ground, and is not attempting a run.^[39]
6. Hit wicket: a batsman is out hit wicket if he dislodges one or both bails with his bat, person, clothing or equipment in the act of receiving a ball, or in setting off for a run having just received a ball.^[40]
7. Hit the ball twice is very unusual and was introduced as a safety measure to counter dangerous play and protect the fielders. The batsman may legally play the ball a second time only to stop the ball hitting the wicket after he has already played it. "Hit" does not necessarily refer to the batsman's bat.^[41]
8. Obstructing the field: another unusual dismissal which tends to involve a batsman deliberately getting in the way (physically and/or verbally) of a fielder.^[42]
9. Handled the ball: a batsman must not deliberately touch the ball with his hand, for example to protect his wicket. Note that the batsman's hand or glove counts as part of the bat while the hand is holding the bat, so batsmen are frequently caught off their gloves (i.e. the ball hits, and is deflected by, the glove and can then be caught).^[43]
10. Timed out; means that the next batsman was not ready to receive a delivery within three minutes of the previous one being dismissed.^[44]
11. Retired out: a batsman retires without the umpire's permission, and does not have the permission of the opposition captain to resume their innings.^[45]

In the vast majority of cases, it is the striker who is out when a dismissal occurs. If the non-striker is dismissed it is usually by being run out, but he could also be dismissed for obstructing the field, handling the ball or being timed out.

A batsman may leave the field without being dismissed. If injured or taken ill the batsman may temporarily retire, and be replaced by the next batsman. This is recorded as retired hurt or retired ill. The retiring batsman is not out, and may resume the innings later. An unimpaired batsman may retire, and this is treated as being dismissed retired out; no player is credited with the dismissal. Batsmen cannot be out bowled, caught, leg before wicket, stumped or hit wicket off a no ball. They cannot be out bowled, caught, leg before wicket, or hit the ball twice off a wide. Some of these modes of dismissal can occur without the bowler bowling a delivery. The batsman who is not on strike may be run out by the bowler if he leaves his crease before the bowler bowls, and a batsman can be out obstructing the field or retired out at any time. Timed out is, by its nature, a dismissal without a delivery. With all other modes of dismissal, only one batsman can be dismissed per ball bowled.

Extra Runs

Extras

Main article: Extra (cricket)

Additional runs can be gained by the batting team as extras (called "sundries" in Australia) due to errors made by the fielding side. This is achieved in four ways:

1. No ball: a penalty of one extra that is conceded by the bowler if he breaks the rules of bowling either by (a) using an inappropriate arm action; (b) overstepping the popping crease; (c) having a foot outside the return crease. In addition, the bowler has to re-bowl the ball. In limited overs matches, a no ball is called if the bowling team's field setting fails to comply with the restrictions. In shorter formats of the game (20–20, ODI) the free hit rule has been introduced. The ball following a front foot no-ball will be a free-hit for the batsman, whereby he is safe from losing his wicket except for being run-out.
2. Wide: a penalty of one extra that is conceded by the bowler if he bowls so that the ball is out of the batsman's reach; as with a no ball, a wide must be re-bowled. If a wide ball crosses the boundary, five runs are awarded to the batting side (one run for the wide, and four for the boundary).
3. Bye: extra(s) awarded if the batsman misses the ball and it goes past the wicketkeeper to give the batsmen time to run in the conventional way (note that one mark of a good wicketkeeper is one who restricts the tally of byes to a minimum).
4. Leg bye: extra(s) awarded if the ball hits the batsman's body, but not his bat, while attempting a legitimate shot, and it goes away from the fielders to give the batsmen time to run in the conventional way.

When the bowler has bowled a no ball or a wide, his team incurs an additional penalty because that ball (i.e., delivery) has to be bowled again and hence the batting side has the opportunity to score more runs from this extra ball. The batsmen have to run (i.e., unless the ball goes to the boundary for four) to claim byes and leg byes but these only count towards the team total, not to the striker's individual total for which runs must be scored off the bat.

Runs

Runs

Main article: Run (cricket)

The directions in which a right-handed batsman intends to send the ball when playing various cricketing shots. The diagram for a left-handedbatsman is a mirror imageof this one.

The primary concern of the batsman on strike (i.e., the "striker") is to prevent the ball hitting the wicket and secondarily to score runs by hitting the ball with his bat so that he and his partner have time to run from one end of the pitch to the other before the fielding side can return the ball. To register a run, both runners must touch the ground behind the crease with either their bats or their bodies (the batsmen carry their bats as they run). Each completed run increments the score.

More than one run can be scored from a single hit; but, while hits worth one to three runs are common, the size of the field is such that it is usually difficult to run four or more. To compensate for this, hits that reach the boundary of the field are automatically awarded four runs if the ball touches the ground en route to the boundary or six runs if the ball clears the boundary without touching the ground within the boundary. The batsmen do not need to run if the ball reaches or crosses the boundary.

Brian Lara of the West Indies holds the record for highest score in both Tests and first-class cricket.

Hits for five are unusual and generally rely on the help of "overthrows" by a fielder returning the ball. If an odd number of runs is scored by the striker, the two batsmen have changed ends, and the one who was non-striker is now the striker. Only the striker can score individual runs, but all runs are added to the team's total.

The decision to attempt a run is ideally made by the batsman who has the better view of the ball's progress, and this is communicated by calling: "yes", "no" and "wait" are often heard.

Running is a calculated risk because if a fielder breaks the wicket with the ball while the nearest batsman is out of his ground (i.e., he does not have part of his body or bat in contact with the ground behind the popping crease), the batsman is run out.

A team's score is reported in terms of the number of runs scored and the number of batsmen that have been dismissed. For example, if five batsmen are out and the team has scored 224 runs, they are said to have scored 224 for the loss of 5 wickets (commonly shortened to "224 for five" and written 224/5 or, in Australia, "five for 224" and 5/224).

Batting

Batting

Main article: batting (cricket)

English cricketer W.G. Grace "taking guard" in 1883. His pads and bat are very similar to those used today. The gloves have evolved somewhat. Many modern players utilise more defensive equipment than was available to Grace, notably helmets and arm guards.

At any one time, there are two batsmen in the playing area. One takes station at the striker's end to defend the wicket as above and to score runs if possible. His partner, the non-striker, is at the end where the bowler is operating.

Batsmen come in to bat in a batting order, decided by the team captain. The first two batsmen – the "openers" – usually face the hostile bowling from fresh fast bowlers with a new ball. The top batting positions are usually given to the most competent batsmen in the team, and the team's bowlers – who are typically, but not always, less skilled as batsmen – typically bat last. The pre-announced batting order is not mandatory; when a wicket falls any player who has not yet batted may be sent in next.

If a batsman "retires" (usually due to injury) and cannot return, he is actually "not out" and his retirement does not count as a dismissal, though in effect he has been dismissed because his innings is over. Substitute batsmen are not allowed.

A skilled batsman can use a wide array of "shots" or "strokes" in both defensive and attacking mode. The idea is to hit the ball to best effect with the flat surface of the bat's blade. If the ball touches the side of the bat it is called an "edge". Batsmen do not always seek to hit the ball as hard as possible, and a good player can score runs just by making a deft stroke with a turn of the wrists or by simply "blocking" the ball but directing it away from fielders so that he has time to take a run.

An iconic image of Australia's Victor Trumper stepping out to drive

There is a wide variety of shots played in cricket. The batsman's repertoire includes strokes named according to the style of swing and the direction aimed: e.g., "cut", "drive", "hook", "pull".

A batsman is not required to play a shot; in the event that he believes the ball will not hit his wicket and there is no opportunity to score runs, he can "leave" the ball to go through to the wicketkeeper. Equally, he does not have to attempt a run when he hits the ball with his bat. He can deliberately use his leg to block the ball and thereby "pad it away" but this is risky because of the leg before wicket rule.

In the event of an injured batsman being fit to bat but not to run, the umpires and the fielding captain were previously able to allow another member of the batting side to be a runner. The runner's only task was to run between the wickets instead of the incapacitated batsman, and he was required to wear and carry exactly the same equipment as the batsman. As of 2011 the ICC outlawed the use of runners as they felt this was being abused.^[34]